Publication

 

Book


1. 벤처 기업 성공 메뉴얼2018.1., 향연, 권계시

2. Kwon, K.S. 2011, LabVIEW machine vision
(권계시, 예제로 쉽게 배우는 LabVIEW 머신비젼, 애드북스, 2012)

3. Kwon K.S. and Steve Ready, Practical Guide to Machine Vision Software: An introduction with LabVIEW, Wiley, 2015

4. (Book chapter) Kwon, K.-S. (2012) Vision Monitoring, in Inkjet-Based Micromanufacturing (eds J. G. Korvink, P. J. Smith and D.-Y. Shin), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527647101.ch9

5. (Book chapter) Kwon, K. S., Yang, L., Martin, G. D., Castrejón-Garcia, R., Castrejón-Pita, A. A. and Castrejón-Pita, J. R. (2016) Visualization and Measurement, in Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets (ed S. D. Hoath), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527684724.ch12

 


International standardization

IEC 62899-302-1:2017 (Project leader)

Printed electronics – Part 302-1: Equipment – Inkjet – Imaging based measurement of jetting speed,

 

IEC 62899-302-6 ED1 (Project leader)

Printed electronics – Part 302-6: Equipment – Inkjet – First Drop Measurement (CD status, 2023.07)


 

International Journals

 

1,  Thanh Huy Phung, Sang Hyeon Park, Inyoung Kim, Taik-Min Lee* & Kye-Si Kwon* , Machine learning approach to monitor inkjet jetting status based on the piezo self-sensing, Scientific Reports, 13, 18089 (2023). https://doi.org/10.1038/s41598-023-45445-0


 

  1. Md. Khalilur Rahman, Jin-Sol Lee & Kye-Si Kwon*, “Fine conductive line printing of high viscosity CuO ink using near field electrospinning (NFES)”, Scientific Reports, volume 13, Article number: 17668 (2023), https://doi.org/10.1038/s41598-023-45083-6

 


 

  1. Md. Khalilur Rahman, Jin-sol Lee, Kye-Si Kwon*, “Realization of thick copper conductive patterns using highly viscous copper oxide (CuO) nanoparticle ink and green laser sintering,” Journal of Manufacturing Processes, Volume 105, 3 November 2023, Pages 38-45, https://doi.org/10.1016/j.jmapro.2023.09.006

 

  1. Md. Abu Mosa, Jeong Yeop Jo, Kye-Si Kwon* Fast on-off jet control of aerosol jet printing (AJP) using internal rotary valve, Additive Manufacturing, Volume 67, 5 April 2023, 103466, https://doi.org/10.1016/j.addma.2023.103466

 

2. Md. Abu Mosa, Jinho Bang, Jeong Yeop Jo, Jin-Sol Lee, and Kye-Si Kwon*, Continuous ink supply and circulation system for a multi-nozzle electrospray, Japanese Journal of Applied Physics 62, SE1001 (2023), https://doi.org/10.35848/1347-4065/acac39


 

3.  Md. Abu Mosa, Se Hyun Kim, Kye-Si Kwon, Multinozzle electrospray method for high-throughput and uniform coating: Application of superhydrophobic coating, J. Coat. Technol. Res, 2023, https://doi.org/10.1007/s11998-022-00725-8


4. Sang Hyeon Park and Kye-Si Kwon*,  Recent Advances in Real-Time Inkjet Monitoring Techniques Based on Piezo Self-Sensing Signals, ACS Applied Electronic Materials, 2022, ACS Appl. Electron. Mater. 2022, 4, 11, 5098–5108, Recent Advances in Real-Time Inkjet Monitoring Techniques Based on Piezo Self-Sensing Signals | ACS Applied Electronic Materials


5. Thanh Huy Phung and Kye-Si Kwon, Improved Continuous Inkjet for Selective Area Coating Using High-Viscosity Insulating Inks, Adv. Eng. Mater. 2022, 2101527, DOI: 10.1002/adem.202101527


6. Odelia Levana, Soonkook Hong, Se Hyun Kim, Ji Hoon Jeong, Sung Sik Hur, Jin Woo Lee, Kye-Si Kwon and Yongsung Hwang, 

A Novel Strategy for Creating an Antibacterial Surface Using a Highly Efficient Electrospray-Based Method for Silica Deposition, Int. J. Mol. Sci. 2022, 23, 513. https://doi.org/10.3390/ijms23010513


7. Md. Khalilur ; Phung, Thanh Huy ; Oh, Soobin; Kim, Se Hyun ; Ng, Tse Nga; Kwon, Kye-Si, High-efficiency electrospray deposition method for non-conductive substrates: Applications of superhydrophobic coatings, ACS Applied Materials & Interfaces, 2021.


8.  Md. Khalilur Rahman; Seong-jun Kim; Thanh Huy Phung; Jin-Sol Lee; Jaeryul Yu; Kye-Si Kwon, Three-dimensional surface printing method for interconnecting electrodes on opposite sides of substrates, Scientific Reports , 2020-10-29 , DOI: 10.1038/s41598-020-75556-x


9. Cheol Park; Jinsol Lee; Kye-Si Kwon; Kuk Young Cho; Jihoon Kim, Fabrication of electrochromic devices by laser patterning of spin-sprayed transparent conductive Ga:ZnO films, Ceramics International DOI: 10.1016/j.ceramint.2020.10.230, 2020


10.  Kwon, Kye-Si; Rahman, Md. Khalilur ; Phung, Thanh Huy; Hoath, Steve; Jeong, SunHo; Kim, Jang Sub,  Review of digital printing technologies for electronic materials, Flexible and Printed Electronics5 043003 (Invited review paper)


11.. Yichen Zhai, Zhijian Wang, Kye-Si Kwon, Sehngqiang Cai, Darren Lipomi, and Tse Nga Ng, Printing Multi-Material Organic Haptic Actuators, Advanced Materials, 2020,   https://doi.org/10.1002/adma.202002541, 2020


12. Seong‐jun Kim, Thanh Huy Phung , Seora Kim , Md. Khalilur Rahman , Kye‐Si KwonLow‐Cost Fabrication Method for Thin, Flexible, and Transparent Touch Screen Sensors, Advanced Materials Technologies – Advanced Materials Technologies, Volume 5, issue 9, 2000441, 2020.

https://doi.org/10.1002/admt.202000441

(Selected for Front Cover page of AMT volume 5, issue 9)

Selected as Best of Advanced Materials Technologies 2020


13.. Thanh Huy Phung and Kye Si Kwon How to manipulate droplet jetting from needle type jet dispensers., Scientific Reports, How to manipulate droplet jetting from needle type jet dispensers | Scientific Reports, 9, Article number: 19669 (2019)


14. Md.Khalilur Rahman,Zhao Lu, and Kye-Si Kwon, Green laser sintering of copper oxide (CuO) nano particle (NP) film to form Cu conductive lines, AIP advances, 8, 095008 (2018)

News: Laser Sintering Optimized for Printed Electronics, Laser Sintering Optimized for Printed Electronics, Laser sintering optimized for printed electronics, Copper ink shown to optimize laser sintering for printed electronics,  New study throws (laser) light in the best way to lay thin-film circuits – ScienceDaily, Copper nanoparticle ink is a thing and scientist want to use it for printing, Copper nanoparticles, green lasers may lower cost of circuitry printing,


15. Thanh Huy Phung, Soobin Oh, Kye-Si Kwon,HIGH-RESOLUTION PATTERNING USING ELECTROHYDRODYNAMIC (EHD) JET: A PRINTING AND PREPARATION GUIDELINE, Journal of Visualized Experiment (JOVE), e57846 | Page 1 of 12, doi:10.3791/57846, https://www.jove.com/video/57846/, 2018


16. Thanh Huy Phung, Kye-Si Kwon, Hayeong Park1, Zhao Lu, A counter electrode integrated electrohydrodynamic (EHD) head with capability of real-time monitoring, Journal of imaging science and technology, , 040403, July-Aug 2018


17. Thanh Huy Phung, Luu Ngoc Nguyen and Kye-Si Kwon,  A Vector Printing Method for High-Speed Electrohydrodynamic (EHD) Jet Printing Based on Encoder Position Sensors, applied sciences, Appl. Sci. 2018, 8, 351; doi:10.3390/app8030351.


18. Thanh Huy Phung, Seora Kim and Kye-Si Kwon, A high speed electrohydrodynamic (EHD) jet printing method for line printing, J. Micromech. Microeng. 27 (2017) 095003


19. Kye-Si Kwon, Jaeryul Yu and Thanh-Huy Phung, Real-time jet failure detection of inkjet heads with 1024 ejectors, Journal of imaging science and technology, (2017), in press


20. Kye-Si Kwon, Hyung-Seok Kim and Moohyun Choi, Measurement of inkjet first-drop behavior using a high-speed camera, AIP, Review of Scientific Instruments, 87, 035101, 2016, pdf_down


21. Wookyu Lee, Hyunmo Koo,Junfeng Sun,Jinsoo Noh, Kye-Si Kwon, Chiseon Yeom, Younchang Choi, Kevin Chen, Ali Javey & Gyoujin Cho, A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors,Scientific Reports, 5, Article number: 17707 (2015)
doi:10.1038/srep17707


22. Kye-Si Kwon, Dahai Zhang and Hyun-Seok Go, Jetting frequency and evaporation effects on the measurement accuracy of inkjet droplet amount, Journal of imaging science and technology, Vol 59, No.2, 2015, pdf down load


23. W.L.Zhang, H.J.Choi, H.S.Ko, K.S. Kwon, Ink-jetting and rheological behavior of a silica particle suspension, Vol. 22, pp. 120-126, Journal of Industrial and Engineering Chemistry, pdf download.


24. Kwon, K.S. et al. An inkjet vision measurement technique for high frequency jetting, AIP, Review of scientific instrument. (85, 065101 (2014), pdf download


25. Kwon, K.S. and Ng, T. N., Improving electroactive polymer actuator  by tuning ionic liquid concentration , Organic electronics, 2014, Vol. 15, 294-298, pdf download


26. Kwon, K.S., Choi, Y.S. and Go,J.K., Inkjet failures and their detection using piezo self-sensing Sensors and actuators A, Volume 201, 15 October 2013, Pages 335–341. pdf download


27. Kwon, K.S. and Lee, D.Y. Investigation of pulse voltage shape effects on Electrohydrodynamic jets using vision measurement technique, Journal of micromechanics and microengineering 23 (2013) 065-18 pdf download


28. Kwon, K.S. et al., Low-cost and high speed monitoring system for multi-nozzle inkjet head, Sensors and actuators A, 180, 2012, 154-165. pdf download


29. Kwon, K.S., Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve,  pdf down , Journal of micromechanics and microengineering, 20 (2010) 115005. pdf download


30. J. Park, B. O. Park, B. H. Ryu, Y.M. Choi, K. S. Kwon, H. J. Choi, Rheological Properties of Ag Suspended Fluid for Inkjet Printing, Journal of applied physics, vol. 108, issue 10, 102803, (2010)


31. Park, C.W, Kwon, K.S., Kim W.B., Min B.K., Park, S.J., Sung, I.H., Yoon, Y.S.,Lee, K.S., Lee, J.H., Seok,J., 2009, “Energy Consumption Reduction Technology in Manufacturing – A selective Review of Policies, Standards, and Research,” International Journal of Precision Engineering and Manufacturing, Vol. 10, No.5, pp. 151-173. (SCI-E)


32. Kwon K S 2009 Waveform Design Methods for Piezo Inkjet Dispensers Based on Measured Meniscus Motion, pdf down, IEEE/ASME Journal of Microelectromechanical Systems, Vol. 18, No. 5, pp. 1118-1125. pdf download


33. Kwon K S 2009 Methods for detecting air bubble in piezo inkjet dispensers, Sensors and actuators A, Volume 153 (1), pp. 50-56 (SCI)


34. Kwon K S 2009 Speed measurement of ink droplet by using edge detection techniques, Measurement, Volume 42 (1), pp. 45-50 (SCI-E)


30. Kwon, K.S. and Kim, W., 2007,“A waveform design method for high speed Piezo inkjet printing based on self-sensing measurement”, Sensors & Actuators A, 140, pp. 75-83, (SCI)


35. Kwon, K.S. and Lin, R.M.,2005, “Finite Element Model Updating using Taguchi Method,” Journal of Sound and Vibration, Vol. 280,2005, pp. 77-99 (SCI)


36. Kwon, K.S. and Lin, R.M., 2005, “Robust Damage Location in Structures using Taguchi Method,” Journal of Structural Engineering, ASCE, Volume 131, Issue 4, pp. 629-642 pp. 629-642 (SCI)


37. Kwon, K.S. and Lin R.M.,2004, “Frequency Selection Method for FRF-based Model Updating,” Journal of Sound and Vibration, Vol. 278, 2004, pp. 285-306 (SCI)


38. Lee, C.W., Kwon, K.S. and Kim,S.K., 2002, “Modal Testing of Rotors with Rotating Asymmetry”, Advances in Vibration Engineering, Vol.1, No.1, pp. 43-52.


39. Lee, C. W., and Kwon, K.S., 2001, “Identification of Rotating Asymmetry in Rotating Machines by using reverse dFRF”, Imeche Journal, Proceedings of the Institution of Mechanical Engineers, Vol. 215, Part C, 2001, pp. 1053-1063. (SCI)


40. Kwon, K.S., and Lee, C.W., 2000, “Random Excitation for Modal Testing of Rotating Machinery: Use of Modulation Technique”, Journal of Sound and Vibration, Vol.234, No.2, pp. 297-309. (SCI)[/vc_column_text]

 

 

Domestic Journals


  1.  주영철, 이혜민, 권계시, 고점도 잉크를 위한 니들 타입 젯 디스펜서의 액적 형성에 관한 해석적 연구, 한국산학기술학회논문지 제23권 제2호, 2022
  2.  박선근, 오수빈, 권계시, PET 필름 위에 투명 전극 구현을 위하여 다중 노즐을 사용한 근접장 전기 방사 프린팅 연구, 대한기계학회논문집 B권 제44권 제3호(통권 제414호)  2020.03  207 – 218 (12 pages) DOI : 10.3795/KSME-B.2020.44.3.207
  3.   권계시, 장대해, 고분자 폴리머 잉크를 이용한 고속 연속 전기 방사 프린팅, 대한기계학회지 B, Vol. 39, No. 4, pp. 379~384, 2015
  4. 4. 김형석, 권계시, 캐드로부터 변환된 비트맵 이미지를 사용한 잉크젯 프린팅, 한국정밀공학회지 제 32 권 제 9 호 pp. 833-840, 2015년
  5. 5. 노형래, 고정국, 권계시, 초정밀 미세 패턴을 위한 전기수력학 잉크젯 프린팅 시스템, 대한기계학회지 B, Vol. 37, No.9, pp. 873-877, 2013.
  6. 6. 권계시, 안승현, 장민혁, 미소 액적의 접촉각 및 건조 특성 측정 시스템 개발, 한국정밀공학회지, 제 30권, 제 4호 pp. 414-420
  7. 7. 권계시, 이대용, CCD 카메라를 사용한 전리수력학적 잉크젯 토출 현상 가시화, 한국정밀공학회, 제 29권, 3호, pp. 295-301, 2012.
  8. 권계시, 이대용, 전류 측정을 이용한 수력학적 잉크젯 토출 모니터링, 한국정밀공학회 , 제 29권, 4호 pp. 449-454, 2012.
  9. 권계시, 김진원, 다중 노즐 잉크젯 헤드의 상호 간섭 측정 및 평가, 한국정밀공학회지 제 28권, 제 1호, pp. 73-79 (2011년 1월)
  10. 권계시,  고정국,  김진원,  전자  인쇄를  위한  잉크젯  프린팅  시스템  개발,  대한기계학회논문집 A  권,  제 34권,  제 10호, pp. 1537-1542 (2010년 10월)
  11. 권계시, 고정국, 김진원, 김동수, 잉크젯 헤드의 오작동 검출 방법 개발, 대한기계학회논문집 A권, 제 34권, 제 10호, pp. 1529-1535 (2010년 10월)
  12. 권계시, 명재환, 엄태준, 주영철, 이상욱, “잉크젯 입력 파형의 파라미터와 토출 속도의 관계” 한국정밀공학회지 제 26권 제 9호 pp.143-147 (2009년 9월)
  13. 권계시, “잉크젯 토출 특성 제어를 위한 입력 파형 설계”, 세라미스트, 제 12권, 제 3호 pp.45-48 (2009년 6월)
  14. 이상욱, 엄태준, 주영철, 김국원, 권계시, “무 펀치 피어싱 공정에서 교번식 고압 적용을 통한 구멍 내 직벽 구현 해석”, 한국산학기술학회논문지 제 10권 제 5호 pp. 929-934 (2009년 5월)
  15. 권계시, 명재환, “잉크젯 파형과 잉크 액적 체적의 관계 실험적 분석”, 한국정밀공학회지 제 26권 제 4호 pp. 1-5 (2009년 4월)
  16. 남석현, 박성수, 송정희, 권계시, “Bluetooth를 이용한 원격 주차 시스템”, 순천향대학교 논문집 제 14권 2호 pp. 119-124, 2008.
  17. 권계시, “잉크젯 토출 특성 평가 장치 개발”, 한국정밀공학회지 제 25권 제 8호 pp. 45-50 (2008년 8월)
  18. 주영철, 한충환, 엄태준, 이상욱, 김국원, 권계시, OLED 증착을 위한 선형 증발원 히터 위치 선정, 제 14권, 제 6호 pp. 515-518 (2008년 6월)
  19. 김국원, 엄태준, 주영철, 이상욱, 권계시, 대면적 “OLED 증착용 새도우 마스크 설계”, 제어 로봇 시스템 학회 논문지 제 14권 제 4호 pp. 348-352 (2008년 4월)
  20. 권계시, 명재환, 주영철, 이상욱, 김국원, 잉크젯 압력파 측정을 위한 브리지 회로 개발, 제어 로봇 시스템학회 논문지 제 14권 제 4호 pp. 342-347 (2008년 4월)
  21. 권계시, 김충환, 균열 진단을 위한 센서 위치 선정, 한국소음진동공학회논문집, 제 17권, 제 4호, pp.324-332, 2007.
  22. 권계시, 다구찌 방법을 사용한 구조물의 손상평가, 한국소음진동공학회논문집, 2006년, 16권, 제 7호, pp.720-728.
  23. 권계시, 정호섭, 이종원, “전류신호를 이용한 능동 자기 베어링계의 제어,” 한국소음진동공학회지, 제5권, 제1호, 1995, pp.49-57.
  24. 최윤식, 권계시, 김정선, 김대성, 잉크젯 모니터링 시스템 개발 및 신뢰성 검증, 한국정밀공학회 추계학술대회, 2011.10.26

 

International conference


  1. Md. Abu Mosa1,2, Jeong Yeop Jo3, Kye-Si Kwon, On-off control of Aerosol jet using internal mechanical rotary valve,  icfpe 2022, Oct. 11~14, 2022.
  2. Jin-sol Lee1 , Sang-hyeon Park1, 2, , Kye-Si KwonPrinting quality improvement based on multiple printing of randomly divided images using grouped nozzles,  icfpe 2022, Oct. 11~14, 2022.
  3.  Md. Abu Mosa1,2, Jinho Bang3, Sang Hyeon Park1, Kye-Si Kwon, multi-nozzle electrospray head and its continuous ink supply system with ink recirculation capability, icfpe 2022, Oct. 11~14, 2022. 
  4. Akuoko Yaw Stephen1, Md. Abu Mosa1, Jinho Bang2, Kwon Kye-Si, Aerosol Jet patterned superhydrophobic surfaces, icfpe 2022, Oct. 11~14, 2022. 
  5. Md. Khalilur Rahman1, Md. Abu Mosa2, Sang-hyeon Park3, Kye-Si Kwon, Realization of low cost and thick copper line patterns using highly viscous CuO (Copper oxide) ink and green laser sintering method., icfpe 2022, Oct. 11~14, 2022.
  6. Mosa MD Abu1, Se Hyun Kim1 and Kye-Si Kwon, An Electrospray coating method using multi-nozzle head, Printing for fabrication, 2021 Online, 11-13, October
  7. Kye-Si Kwon, Inkjet based direct printing methods for non-flat surfaces, Printing for fabrication, Printing for fabrication, 2021 Online, 11-13, October (Keynote talk)
  8.  Kye-Si Kwon1,3,* and Thanh Huy Phung,, Continuous Inkjet Printing (CIJ) for additive manufacturing from jetting modulation to deposition control: an application of selective area coating, 2021,  2021, ICFPE, 27 September to 1 October, 2021.
  9. Md. Khalilur Rahman1, Md. Abu Mosa1, Kye-Si Kwon, Copper oxide (CuO) fine line fabrication by printing method and green laser sintering to form Cu conductive line, ICAI 2021, 4-8 Oct. 2021. Chiba, Japan (Online)
  10. Kye-Si Kwon, Md. Khalilur Rahman and Soobin Oh, An efficiency electrospray method for hydrophobic coating, Printing for fabrication 2020, Online, 19-21 October.
  11. Kye-Si Kwon, Seong-jun Kim, Md. Khalilur Rahman and Thanh Huy Phung, The use of high viscous ink for fine inkjet printing and the printed electronics applications, IWNA 2019, 6-0 Nov. 2019, Phan Thiet, Vietnam.
  12. 1. Kye-Si Kwon, Seong-jun Kim, Jin-Sol Lee, Sun Keun Partk, Jaeryul Yu and Md. Khalilur Rahman, Double sided electrodes connection based on printing method, Printing for fabrication, 29 Setp-3 Oct 2019, San Francisco
  13. Kye-Si Kwon, Seongjun Kim, Soobin Oh and Md. Khalilur Rahman The use of near-field electrospinning to print bridge electrodes for touch panel applications, IMID, Busan, 2018.
  14. Jetting characterization of non-contact dispensers for ink with wide range of viscosity, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  15. UV pulsed laser selective ablation and sintering for electrospinning printed lines on PET, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  16. Laser sintering of near field electrospinning (NFES) printed conductive lines on PET film, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  17. Wavy electrode printing using electrospinning printing, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  18. Jetting characterization of non-contact dispensers for ink with wide range of viscosity, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  19. Laser sintering for metal ink printed patterns with large area, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  20. Multi-nozzle heads for near field electrospinning printing, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  21. Inkjet jetting failure detection method for SG1024 head, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  22. Laser integrated EHD printing system for in-situ sintering of printed conductive patterns, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  23. A vector printing method for electrohydrodynamic jet printing using encoder position sensors, ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  24. An electrohydrodynamic printhead design with external ring electrode ICFPE 2017 (International conference on flexible and printed electronics), 4-7, September, 2017.
  25. Thanh-Huy Phung, Soobin Oh, Jaeryul Yu, Seora Kim and Kye-Si Kwon, An electrohydrodynamic (EHD) jet printing method for increasing printing speed, Printing for fabrication (NIP), Denver Colorado, November 5 – 9, 2017
  26. Kye-Si Kwon and Hyung-Seok Kim, Evaluation method of inkjet first drop dissimilarity, Printing for fabrication (NIP), Sept 12-16, Manchester, UK.
  27. Kye-Si Kwon, Dahai Zhang and Hyun-Seok Go, Jetting frequency and evaporation effects on the measurement accuracy of inkjet droplet amount, NIP31 (31th international conference on digital printing technologies), Sept 27- Oct 1, 2015, Portland, Oregon
  28. Kye-Si Kwon, Electrohydrodynamic (EHD) jet printing for printed electronics, The 11th Pacific Rim Conference of Ceramic Societies, 2015, Aug. 30-Sept 4, Jeju Korea
  29. Kye-Si Kwon, Min-Hyuck Jang and Hyun-Seok Ko, Tracking based inkjet measurement for evaluating high frequency jetting, NIP30/Digital Fabrication, Sept 7-11, 2014, Philadelphia, Pennsylvania, 2014.
  30. Kwon, K.S., et al. A Vision measurement technique for evaluation of pulse voltage effect on electrohydrodynamic jet, NIP29/Digital Fabrication 2013, Sept. 29-Oct.3, 2013, Seattle, Washington, USA
  31. Kwon, K.S. et. al, Electrohydrodynamic jet printing for printed electronics, ICFPE 2013, Jeju, Korea Sept 10-13, 2013
  32. Kwon, K.S. et al., Development of inkjet monitoring system via piezo self-sensing, NIP27 and Digital fabration 2011, Minneapolis, USA, Oct 2-6, 2011
  33. Kwon K.S. Go, J K, Kim, J W and Oh, D. H. 2010, In situ measurement of instantaneous jetting speed curve, NIP26, Texas, USA, sept. 19-23, 2010
  34. Kwon K.S. 2010. Measurement and control issues of droplet jetting behavior in inkjet printing, IUMRS-ICEM (invited speaker), Seoul, Korea (2010. 8. 22)
  35. Kwon, K S, Kim, J W, Go, J K, 2009, Development of inkjet printing system for printed electronics, ICFPE2009, JeJu, Korea, pdf down
  36. Kwon, K S, Go, J K and Kim, D S, 2009, Methods for detecting jetting failure of inkjet dispensers, NIP25, Digital Fabrication 2009, Kentucky, USA
  37. Kwon, K S 2008 Inkjet status monitoring using meniscus measurement, Proceedings of NIP24, Pittsburgh, USA
  38. Youngcheol Joo, Choong Hwan Han, Tai Joon Um, Sang-Wook Lee and Kye-Si Kwon, Heat transfer analysis of Circular Source for OLED Vapor Deposition, 8th World congress on computational mechanics, venice, Italy, 30 June -4 July, 2008
  39. Kwon, K.S. Myong, J.H. and Go, J,K. “Development of inkjet evaluation system”, Asian Leadership in Display Technology (ADW 2008 Digest), April. 10-11, 2008, pp 69-71
  40. Kwon, K.S., S.J. Shin and S.J. Kim, “The opportunity of printing technology for display manufacturing process,” Proceedings of colloquium on micro/nano thermal engineering, August 17-19, 2005, Seoul National University
  41. Kwon, K.S. and Lin, R.M., “Application of Taguchi method to Identify Damage in Cantilever Beam,” ASME, DETC, 19th Biennial Conference on Mechanical Vibration and Noise, September 2-6, 2003, Chicago, Illinois
  42. Lee, C.W., Kwon, K.S. and Kim, S.K., “Modal Testing of Rotors with Rotating Asymmetry”, VETOMAC; Invited Paper, Bangalore, INDIA, October 25-27, 2000
  43. Lee, C.W. and Kwon, K.S., “Crack Detection in Rotating Machinery by Modal Testing”, Imeche conference, University of Nottingham, UK, 12-14 September 2000, pp.535-543
  44. Lee, C.W., Kwon, K.S. and Lee, S.K., “Modal Testing of Rotors with Shaft Inertia/Stiffness Asymmetry: One-Exciter/Two-Sensor Method”, International congress on Sound and Vibration, Germany, July 4-7, 2000, pp. 869-876

 

Domestic conference


  1. 장대해, 권계시, 풍탄후이, 전기수력학 잉크젯으로 형성된 전도성 패턴의 레이저 신터링 연구, 한국정밀공학회 2016년도 춘계학술대회, pp;. 692, 2016

  2. 오수빈, 권계시, 김보선, 김지수, 박규주, 전기방사법을 이용한 투명전극 프린팅, 한국정밀공학회 2016년도 춘계학술대회 pp 905, 2016

  3. 유재열, 권계시, 김민주, 이재봉, 토출 모니터링을 위한 측정 시스템 개발, 한국정밀공학회 2016년도 춘계학술대회 pp 907, 2016

  4. 장민혁, 권계시, 고현석, 잉크젯 고주파 토출 측정을 위한 비전기술 개발, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집 pp. 177-178, 2014

  5. 노형래, 고정국, 엄태준, 권계시, 전기 수력학 잉크젯을 이용한 초정밀 미세 패턴 연구, 대한기계학회 마이크로/나노공학부문 춘계학술대회, 2013년 5월 23일, 부산 BEXCO

  6. 이대용, 권계시, 수력학적 잉크젯의 제팅 특성 측정 방법 개발, 한국정밀공학회 2011년도 추계학술대회논문집, 2011.10.16

  7. 최윤식, 권계시, 김정선, 김대성, 잉크젯 모니터링 시스템 개발 및 신뢰성 검증, 한국정밀공학회 2011년도 추계학술대회논문집, 2011.10.16

  8. 고정국, 권계시, 전자 인쇄를 위한 CAD를 이용한 잉크젯 프린팅 알고리즘 개발, 한국정밀공학회 추계학술대회, 창원 2010.11.10

  9. 김진원, 권계시, 다중 노즐 헤드의 잉크젯 프린팅 정밀도 향상을 위한 알고리즘 개발, 한국정밀공학회 추계학술대회, 창원 2010.11.10

  10. 이진아, 권계시, 고속카메라를 이용한 잉크젯 초기 거동 측정, 한국정밀공학회 추계학술대회, 창원 2010.11.10

  11. 권계시, 고정국, 김진원, 전압 파형을 이용한 잉크젯 액적 형성 제어, 한국유체공학학술대회 (부산), 2010.8.18 (invited talk)

  12. 권계시, 고정국, 김진원, 전자 인쇄를 위한 잉크젯 프린팅 시스템 개발, 대한기계학회 춘계학술대회 (생산 및 설계공학부문, 2010, pp. 174-175 (2010. 4.22)

  13. 권계시, 고정국, 김진원, 김동수, 잉크젯 헤드의 오작동 검출 방법 개발, 대한기계학회 춘계학술대회 (생산 및 설계공학부문), 2010, pp. 338-339 (2010.4.22)

  14. 권계시, 김진원, 김동수, “다중노즐 잉크젯 헤드에서 토출 불량 검출”, 한국정밀공학회 추계학술대회 (2009년 11월 29일)

  15. 권계시, 김진원, 고정국, “메니스커스 측정을 이용한 잉크젯 입력 파형 설계”, 한국재료 춘계학술대회 및 제 16회 신소재 심포지움 (2009년 5월 21일)

  16. 권계시, 고정국, 김진원, “잉크젯 토출 특성 제어를 위한 측정 방법 개발”, 소음진동공학회 춘계학술대회, 한화리조트 설악 (2009년 4월 24일)

  17. 권계시, “잉크젯 헤드 작동상태 모니터링 및 제어”, 2008 Printed Electronics Korea, 대전 기계연구원, 2008년 12월 13일

  18. 명재환, 권계시, 엄태준, 주영철, 이상욱, “잉크젯 입력 파형에 의한 토출 특성의 실험적 연구”, 한국정밀공학회 2008년 추계학술대회, 2008년 11월 12 ~14일, 대전컨벤션센터

  19. 주영철, 한충환, 엄태준, 이상욱, 김국원, 권계시, OLED 증착을 위한 선형 증발원 히터 위치 선정, 제 14권, 제 6호 pp. 515-518 (2008년 6월)

  20. 주영철, 한충환, 엄태준, 이상욱, 김국원, 권계시, OLED 증착을 위한 선형 증발원 히터 위치 선정, 제 14권, 제 6호 pp. 515-518 (2008년 6월)

  21. 권계시, 피에조 잉크젯 헤드의 제팅 상태 모니터링 기술, 2008년 소음진동공학회 춘계 학술대회논문집

  22. 권계시, 김병헌, 김상일, 신승주, 김성진, “잉크젯 작동 상태 진단 및 모니터링”, 2007년 기계학회 춘계 학술대회, pp. 455-460

  23. 권계시, 김우식, 김상일, 신승주, 김성진, “피에조 잉크젯의 셀프 센싱 검출 및 응용”, 2007년 소음진동공학회 학술대회 (KSNVE07S-12-01)

  24. 권계시, 이종원 “모드 시험에 의한 회전기계 균열 검출,” 대학기계학회학술대회, 2000년 7월, pp.196-201

  25. 권계시, 이종원, “회전기계 모드 시험을 위한 측정 및 가진 방법,” 한국소음진동학술대회, 용평, 1998년 5월, pp.238-243

  26. 권계시, 정호섭, 이종원, “전류신호를 이용한 전자기 베어링계의 제어,” 기계학회 춘계학술대회, 한국과학기술원, 대전, 1994년 4월, pp. 655-658

[/vc_tab]
Empty tab. Edit page to add content here.

International Patents


  1. Printing system, PCT/KR2008/002119

  2. Method of fabricating black matrices of color filter, Application number: 11/593,616, 2007

  3. Color filter and fabrication method thereof, US Pat. App 11/431,714 – Filed May 11, 2006

  4. METHOD OF MANUFACTURING COLOR FILTER USING INK-JET, US Pat. App 11/566,939 – Filed Dec 5, 2006

  5. Inkjet printhead and method of fabricating color filter, US Pat. App 11/491,928 – Filed Jul 25, 2006

  6. Piezoelectric inkjet printhead having a unidirectional shutter, US Pat. App 11/239,104 – Filed Sep 30, 2005

  7. Method of manufacturing color filter using inkjet (US patents), Application number: 11/593,603 Filed Nov 7, 2006

  8. Normalization method of ink drops to ensure uniformity of amount of ink ejected from nozzles of inkjet head (US patents), Application number: 11/585,254 Filed Oct 24, 2006

  9. Electrostatic latent image forming medium, image forming apparatus including the electrostatic latent image forming medium and method of forming an electrostatic latent image, US patent applciation No. 20050259140, November 24, 2005.

  10. Electrostatic latent image forming medium using optical shutter array and image forming apparatus having the same, US patent applciation No. 20060082634 ,April 20, 2006.

  11. Nozzle plate, inkjet printhead with the same and method of manufacturing the same, US patent applciation No. 20060092224, May 4, 2006.

  12. Piezoelectric inkjet printhead having a unidirectional shutter US patent applciation, No. 20060092236, May 4, 2006.

  13. Inkjet printhead having a cantilever actuator US patent applciation, No. 20060092237, May 4, 2006.

  14. Nozzle plate, printhead having the same and methods of operating and manufacturing the same, US patent applciation No. 20060092239, May 4, 2006.

  15. Kim; Hyung Jin, Kwon; Kye Si, Lee; Hyuk, “Coil winding number variable type motor and coil winding number varying method for varying cooling and heating capacity of reciprocating compressor”, US Patent No. 6,841,967

  16. Kwon; Kye-Si, Lee; Hyuk, Kim; Hyung-Jin, “Operation control method resonance frequency of reciprocating compressor”, US Patent No. 6,746,211

  17. Kwon; Kye Si, Kim; Hyung Jin, Lee; Hyuk, “Reciprocating motor” US patent No. 6,858,954

  18. Kwon; Kye-Si, Lee; Hyuk; Kwak; Tae-Hee; Kim; Hyung-Jin; Oh; Sang-Man, “Reciprocating motor US Patent No. 6,838,789

  19. Yoo; Jae Yoo, Kim; Hyung Jin, Kwon; Kye Si, “Apparatus and Method for Controlling Operation of Reciprocating Compressor,” US Patent No. 6,520,746 Kwon, K.S., Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve,  pdf down , Journal of micromechanics and microengineering, 20 (2010) 115005.

 

Domestic Patents


1. 3차원 프린팅 방법,  1022212920000 (2021.02.23)

2. 잉크젯을 사용한 콘택트 렌즈 제조 방법 (METHOD FOR MANUFACTURING CONTACT LENSES USING INK-JET), 1021454230000, (2020.08.11)
3. 잉크젯을 사용한 콘택트 렌즈 제조 방법 (METHOD FOR MANUFACTURING CONTACT LENSES USING INK-JET), 1021454310000 (2020.08.11)
4. 잉크젯을 사용한 콘택트 렌즈 제조 방법 (METHOD FOR MANUFACTURING CONTACT LENSES USING INK-JET), 1021454370000 (2020.08.11)
3. 양면 배선 연결이 가능한 전자 인쇄 시스템 (ELECTRONIC PRINTING SYSTEM CAPABLE OF CONNECTING DOUBLE-SIDED WIRING), 1021060430000 (2020.04.23)
4. 전기 스프레이 프린팅 시스템, 1019828260000 (2019.05.21)
5. 잉크젯 프린팅 멀티 노즐 모니터링 방법, 등록번호/일자 1019808070000 (2019.05.15)

6. 잉크젯 프린팅 멀티 노즐 모니터링 시스템, 1019808010000 (2019.05.15)

7. 전기수력학적 잉크젯 장치(Electro hydro dynamic inkjet apparatus), 1018461600000, 2018.04.02

8. 전기수력학적 잉크젯 장치(Electro hydro dynamic inkjet apparatus), 1018542750000, 2018.04.26

9. 인쇄 전자 벡터 프린팅 방법(Vector printing method for printed electronics), 등록번호 : 1016199240000 (등록일자 : 2016.05.03)

10. 전기수력학적 잉크젯 장치(Electro hydro dynamic inkjet apparatus), 등록번호 : 1016155760000, (등록일자 : 2016.04.20)

11. 인쇄 전자 프린팅 방법(PRINTING METHOD FOR PRINTED ELECTRONICS), 출원번호 : 1020140120872, (출원일자 : 2014.09.12)

12. 전기수력학적 잉크젯을 이용한 리페어 장치(Repair apparatus using electro hydro dynamic inkjet), 등록번호 : 1015990400000, 등록일자 : 2016.02.24

 13. 전기수력학적 잉크젯을 이용한 리페어 장치(Repair apparatus using electro hydro dynamic inkjet), 등록번호 : 1015990370000, 등록일자 : 2016.02.24

14. 빌트인 캐드 인쇄 전자 시스템의 프린팅 방법(PRINTING METHOD OF BUILT-IN CAD PRINTING ELECTRONIC SYSTEM), 등록번호 : 1015090460000, (등록일자 : 2015.03.31)

15. 캐드 도면을 이용한 전자 인쇄 시스템의 벡터 프린팅 방법(VECTOR PRINTING METHOD OF ELECTRONIC PRINT SYSTEM USING CAD DRAWINGS), 등록번호 : 1013614560000, (등록일자 : 2014.02.04)

16. 전기수력학적 잉크젯 장치(ELECTRO-HYDRODYNAMIC INK JET DEVICE), 등록번호 : 1013479800000, 등록일자 : 2013.12.27

17. 전기수력학적 잉크젯 장치(ELECTRO-HYDRODYNAMIC INK JET DEVICE), 등록번호 : 1013480240000, 등록일자 : 2013.12.27

18. 접촉각 측정 방법(METHOD FOR MEASURING CONTACT ANGLE), 등록번호 : 1011876640000, 등록일자 : 2012.09.26

19. 접촉각 측정 방법 등록 1011876640000 (20120926)

20. 잉크방울의 거동 분석 시스템 및 이를 이용한 잉크방울 거동 분석 방법 등록 1010953660000 (20111212)

21. 잉크 모션 측정 장치 및 방법 출원 10-2010-7022955 (20101014)

22. 고속 카메라를 이용한 이미지 분석 방법 등록 1011516610000 (20120524)

23. 피에조 셀프 센싱을 이용한 불량 노즐 검출 시스템, 출원번호 10-2010-0096619

24. 피에조 셀프 센싱을 이용한 불량 노즐 검출 방법, 출원번호 10-2010-0096620

25. 잉크 방울의 거동 분석 방법, 출원번호 10-2010-0041854

26. 잉크 방울 토출 시스템의 벡터 프린팅 방법, 출원번호 10-2010-0041855

27. 캐드 도면을 이용한 전자 인쇄 시스템의 벡터 프린팅 방법, 출원번호 10-2010-0041856

28. 액체 방울의 토출 방법, 출원번호 10-2010-0022661

29. 액체 방울의 토출 방법, 출원번호 10-2010-0022662

30. 멀티 레이어 인쇄 방법, 출원 번호10-2010-0022663


31. 잉크방울의 거동 분석 시스템, 출원 번호 10-2009-0058986


32. 잉크 방울의 메니스커스 측정방법, 출원번호 10-2009-0058988


33. 잉크젯프린터기에 있어서 잉크방울의 속도측정방법 등록 1009276960000 (20091112)


34. 잉크젯프린터기에 있어서 잉크방울의 속도 및 체적측정방법 등록 1009179930000 (20090911)


35. 피에조 잉크젯 헤드의 동작 검출장치 및 방법, 공개 1020080053737 (20080616)


36. 잉크젯 헤드의 노즐들로부터 토출되는 잉크 액적들의 양을 균일하게 하기 위한 잉크 액적들의 정규화 방법, 공개 10-2007-0082386 (2007.08.21)


37. 솔벤트 토출장치를 구비하는 잉크젯 프린트헤드 및 솔벤트토출을 이용하여 균일한 두께를 갖는 컬러필터의 제조방법, 공개 10-2007-0016275 (2007.02.08)


38. 컬러필터 및 그 제조방법, 공개 10-2006-0119158 (2006.11.24)


39. 잉크젯 방식을 이용한 컬러 필터의 제조방법, 공개 10-2007-0081939 (2007.08.20)


40. 컬러 필터의 제조방법, 등록 10-0738103-0000 (2007.07.04)


41. 잉크젯 방식을 이용한 컬러 필터의 제조방법, 공개 10-2007-0083031 (2007.08.23)


42. 컬러 필터용 블랙 매트릭스의 제조방법, 공개 10-2007-0079880 (2007.08.08)


43. 노즐 플레이트와 이를 구비한 잉크젯 프린트헤드 및 노즐플레이트의 제조 방법, 등록 10-0580654-0000 (2006.05.09)


44. 노즐 플레이트의 제조 방법 등록 10-0668309-0000 (2007.01.08)


45. 박막 트랜지스터 어레이를 이용한 정전잠상 형성매체와이를 구비한 화상형성장치 등록 10-0634504-0000 (2006.10.09)


46. 권계시, “왕복동식 압축기의 운전제어방법” 등록번호 10-0451233-0000


47. 권계시, 이혁, 김형진, “왕복동식 압축기의 스트로크 추정방법”, 등록번호 10-0455183-0000


48. 이혁, 권계시, 김형진 “왕복동식 압축기의 공진주파수 조절 장치”, 등록번호 10-0464043-0000


49.  김형진, 권계시, 이혁 “리니어 컴프레샤의 용량가변형 모터 구동회로”, 등록번호 10-0404108-0000


김형진, 권계시, 이혁, “리니어 컴프레샤의 용량가변형 모터”, 등록번호 10-0498302-0000


노기원, 권계시, 정충민, “왕복동식 압축기의 윤활유 공급 장치”, 등록번호 10-0425743-0000


정충민, 이동수, 권계시, “왕복동식 압축기의 루프 파이프 구조”, 등록번호 10-0430009-0000


김형진, 권계시, 이혁, “멀티 윈도우형 리니어 모터”, 등록번호 10-0367603-0000


김형진, 권계시, 이혁 “리니어 컴프레샤의 구동장치”, 등록번호 10-0367602-0000


김형진, 권계시, 이혁, “멀티 윈도우형 리니어 모터”, 등록번호 10-0374834-0000


김형진, 권계시, 유재유, “선형 압축기의 스트로크 제어장치 및 방법”, 등록번호, 10-0351155-0000


권계시. “리니어 압축기의 토출밸브 구조”, 등록번호, 10-0339599-0000


이종원, 권계시, “회전기계의균열감지시스템및그진단방법”, 등록번호, 10-0306122-0000. 권계시, 김진원, 다중 노즐 잉크젯 헤드의 상호 간섭 측정 및 평가, 한국정밀공학회지 제 28권, 제 1호, pp. 73-79 (2011년 1월)